FCR line

The main attraction of our Escofier machines is use of a numerical axis combining high performance, low power consumption, maintenance almost zero and minimum operating noise. Of course, the morphology of Escofier machines always used to associate a single cylinder to a symmetrical movement. A position control loop with a resolution of less than 5 microns, coupled with a manufacturing very high stiffness and accuracy based on a frame and cast iron carriages, possible to achieve capabilities rarely obtained. Already greatly appreciated in the aviation industry and the energy industry for the rolling of very difficult parts, this series is also expanding in the automotive industry for the rolling of special screws or splines. This original and powerful design achieves precision and very high capabilities.

For roll-finishing and densification of sintered parts, we have a specific range FCR line with the machine FLEX M 20 HCN which is dedicated to these operations. This machine is equipped with a hydraulic cylinder to control the effort through a measurement system associated with the hydraulic axis scanned of two carriages.


FLEX M 20 e



FLEX M 20 HCN  FCR line

Hydraulic machine of 20 Tons